Technologies and Automated Control Systems for the Processes of Sintering and Blast-Furnace Production
Automated Process Control System (APCS) for Blast Furnace Nr. 1 of CJSC «Makeevka Metallurgical Works»
Automated Control System for the Process Thermal Conditions
Automated System of Control over the Gas Phase Pulsation in the Blast Furnace
Automated Control System for Burden Components Dosing at Sintering Plants
Sinter Production Technology Using Ignition Hearths of Advanced Construction
System for Coke Consumption Correction per Dose Depending on Its Humidity
Automated System of Record and Control over Materials Acceptance, Stocking and Blending in the Ore Stockyard of the Blast-Furnace Shop of OJSC «Zaporozhstal» (SARC OS)
Automated Control System for Burden Materials Dosing – ACS «Burden Charging»
Automated Control System for Coke Dosing
Automated Control System for Heat Load of Blast Furnace Cooling Staves
Automated Control System for Burden Materials Charging into the Bins of the Sintering Plant
Technologies, Equipment and Automated Control Systems for the Processes of Steelmaking and Continuous Steel Casting
Casting and Rolling Technology for Ingots from Unkilled and Semilkilled Steel Grades
Upgraded Technology of Unkilled and Semikilled Steel Deoxidation
Technology of Semikilled and Unkilled Steel Production Using the Ingot of a New Rational Form
Technologies and Equipment for Slag Cutoff during Steel Tapping from Steel-Making Units
Multifunctional Systems of Sliding Gates (Conception of Application in Steelmaking)
Software Package Predicting the Structure Formation of a Continuous Casting
Optimization of Metal Flows in the Intermediate Ladle of a Continuous Caster
Automated Control System for Steel-Teeming Ladle Drying and Heating
Choosing Rational Parameters for the Continuous Caster Processing Line
Prediction of Thermophysical Processes during the Formation of a Continuous Casting
Working out the Measures for Avoiding the Scale «Coiling» by the Continuous Caster Rollers When Casting in Long Series
Technologies and Automated Control Systems for Rolling and Hardware Production Processes
Development of the Rolling Mill Practices for Roughing Mills
Multistrand Rolling-Slitting (MRS) is a Non-Conventional Technology of Rebars and Merachnt Bars Production
The System of Control over the Rolled Stock Cutting Process on a Continuous Billet Mill (Version 1)
The System of Control over the Rolled Stock Cutting Process on a Continuous Billet Mill (Version 2)
Firmware System for Data Acquisition and Control over the Main Drives Operating Parameters on Roughing and Continuous Billet Mills
Digital Integrated System of Control over the Main Drive of the Rolling Mill 1300 in the Blooming Shop of KRSIMMW "Krivirozhstal"
Automated Control System for Ingot Heating
System of Control over the Rolling Mill Practice and Speed Schedules of a Roughing Mill
System of Control over the Parameters of Main Electric Drives on Reversing Mills
Automated Tracking System for a Continuous Rolling Mill
Information-Calculating System "The Operator's Adviser"
Tracking System for Slabs Rolling Process on a Mill Complex "Roughing Mill - Continuous Hot Rolling Mill"
Integrated Measuring System for a Workpiece, Moving along the Processing Line of a Rolling Mill
System for Rational Workpiece Cutting on the Shears of Roughing Mills
Improvement of Continuous Furnace Heating Modes due to Modernization of the «Pipe-in-Pipe» Burners
Automated System of Control over the Heating Modes of Soaking Pits
System of Control over the High-Speed Wire Blocks Setup (ESCB)
«T-D» Technology — Improvement of the Metal Plastic Properties along with the Reduction of Mechanical Anisotropy
Complex Software for the Automated Control System of the Controlled Cooling Unit for Sheet Products
Automated Position Control System for the Screw-Down Structure of Vertical Rolls of Slabbing Mill "1150", ACS "APCS VRSDS 1150"
Upgrade of Control System for the Furnace Section of 150 Mill of CJSC «Makeevka Metallurgical Works»
© 2005 RPC «Donix»
83102, Ukraine, Donetsk, Kuibysheva Str. 44 Phone: +38 062 388-91-20 email: donix@donix-ua.com
